Best Air Compressor for Impact Wrench – Assuming you take on DIY development, you can wind up building many things that utilization nails. For this, you can utilize battery pneumatic nailers, yet these have one capacity and are costly.

Best Air Compressor for Impact Wrench

#01 – PORTER-CABLE C2002 Air Compressor




Our recommendation for the finest air compressor for impact wrenches for the money is the PORTER-CABLE C2002 Air Compressor. It comes with a 6-gallon air tank that can handle most modest and medium-sized projects. The tank can hold up to 150 PSI, and the hose can provide 2.6 cubic feet per minute (CFM) at 90 PSI. It includes two simple gauges that show how much pressure is left in the tank and how much is left in the line. During downtime, an useful shroud protects the gauges and other vital equipment from the elements. The machine has two controlled air couplers that allow two persons to utilise it at the same time.

The disadvantage of the PORTER-CABLE C2002 is that it is extremely noisy and produces powerful enough vibrations to cause it to slide out of place when in use. Because it’s a giant foldout rather than a book, the directions are also difficult to follow.



  • 90-PSI max pressure
  • Six-gallon tank
  • Easy to read gauges
  • Cover
  • Two regulated air couplers
  • 6-CFM


  • Loud
  • Hard to read instructions
  • Vibrations



#02 – Eagle EA-5000 Silent Series 5000 Air Compressor 



Our preferred air compressor for impact wrenches is the Eagle EA-5000 Silent Series 5000 Air Compressor. Because to the low RPM motor design, it runs quietly. When you switch it on, it uses very little electricity, and the oil-free double piston pump never needs to be serviced. It produces 6.1 CFM at 90 PSI, but it may be be adjusted for alternative outputs. The 5.5-gallon tank holds enough air for most small and medium-sized projects, and the drain valve makes it simple to empty the machine when you’re done.

The most significant disadvantage of the Eagle EA-5000 is the relatively short power chord, which may necessitate the use of an extension cord. It’s also heavier than a lot of the other models on our list.


  • Quiet operation
  • Oil-free double piston pump
  • Low amp draw
  • 1 CFM at 90 PSI
  • 5-gallon tank
  • Easy to use drain valve


  • Heavy
  • Short power cord


#03 – BOSTITCH BTFP02012 Pancake Air Compressor




A six-gallon tank is included with the BOSTITCH BTFP02012 Pancake Air Compressor. It has a high-efficiency motor that produces 2.6 CFM at 90 PSI and is simpler to start in the cold. The oil-free pump requires extremely little maintenance, and two couplers allow two persons to operate the compressor at the same time.

The BOSTITCH, unfortunately, has a number of drawbacks. It’s noisy (78.5 dBA) and heavy (31 pounds) to move about, and the tank fills slowly and takes several minutes to reach useful pressure. Because the knurled knob doesn’t operate as effectively as it used to, removing air from the machine is a lengthy procedure.



  • 6-gallon tank
  • 6 CFM at 90 PSI
  • High-efficiency motor
  • Dual couplers
  • Oil-free pump


  • Loud
  • Heavy
  • Fills slow
  • Slow draining


#04 – CRAFTSMAN CMEC6150K Air Compressor




The CRAFTSMAN CMEC6150K Air Compressor has a six-gallon tank and an engine that is intended to start in cold conditions and recover quickly. It continually emits 2.6 CFM at 90 PSI, and the tank can hold up to 150 PSI. The oil-free pump is low-maintenance and increases the motor’s life.

The CRAFTSMAN CMEC6150K had a problem with instructions that were not very clear and left many questions unanswered. We also found it to be quite noisy, with a hose that was almost comically tiny.

It was quite dissatisfied with my purchase. It was a rebuilt/return/repackage item. It’s no surprise that the pricing is low. The fact that this was not a brand-new item should have been emphasised. All of the parts were loose in the package (and one was missing! ), and the hose was partially damaged due to being bent. DISAPPOINTED. It was just too much work to return it and the firm to whom it belonged.


  • Great unit for what it is, portable and easy to use
  • So far, so good
  • Great price a must-have for all air tool users. very solid very well built


  • You won’t be disappointed
  • Quality control problem



#05 – Senco PC1010 Air Compressor




The Senco PC1010 Air Compressor is a compact air compressor that operates quietly. This concept worked perfectly in a little space. Its small size allows it to fit virtually anyplace, and its aluminium shell is both sturdy and lightweight. It has a high-quality feel to it and produces 1.4 CFM at 90 PSI.

The Senco PC1010, on the other hand, suffers from a one-gallon tank. The unit’s limited tank capacity means it can only store enough air for the tiniest of operations. Basketballs and bike tyres will work OK, however car tyres and impact wrenches may be too much for the equipment. You may need to take a break halfway through to allow the compressor to cool.


  • Lightweight
  • Quiet
  • 120 PSI max output
  • 4 CFM at 90 PSI


  • One-gallon tank
  • Takes a long time



#06 – California Air Tools CAT-1P1060S Air Compressor



The California Air Tools CAT-1P1060S Air Compressor is one of the quietest on this list, and its oil-free pump makes it more efficient in cold weather. It has a maximum pressure of 120 PSI and a low amp draw, so it won’t turn off the lights every time it starts up. It also comes with a number of safety measures, such as thermal overload prevention.

California Air Tools’ disadvantage is that it only produces around 1.2 CFM at 90 PSI, which may not be enough for your impact wrench. Its one-gallon tank is only suitable for little chores such as basketballs and bike tyres, and it produces powerful vibrations when operating, which may lead it to walk across the floor.


  • Very quiet
  • Oil-free pump
  • 120 PSI max pressure
  • Thermal overload protection


  • 2 CFM at 90 PSI
  • 1-gallon tank
  • Strong vibrations
  • Flimsy regulator knob



#07 – Makita MAC5200 Big Bore 3.0 HP Air Compressor




The Makita MAC5200 Big Bore 3.0 HP Air Compressor is a strong compressor that uses a powerful 3-horsepower motor to produce 6.5 CFM at 90 PSI, which should be plenty to power your impact wrench. Its cast iron soul cylinder is exceptionally tough and ready to withstand years of abuse. The sturdy wheels give stability and mobility, and the folding handles make it easy to store. The built-in storage box allows you to keep everything with you while working, and the industrial-strength air filter prevents impurities from entering the motor.

Because it is not oil-free, it requires a bit more care than some of the other types. You will need to keep an eye on the levels and apply oil as needed. In cold weather, the oil in the engine makes it much more difficult to start, and at 75 pounds, this is one of the heaviest air compressors on the list.

Otherwise, as is typical with Makita, the quality is excellent. It’s perfect for my nail guns. It’s a little loud, but it’s still functional indoors. My household outlets, which have conventional 15A fuses, are not tripped.


  • 5 CFM at 90 PSI
  • Cast iron cylinder
  • Folding handle
  • Rugged wheels
  • Three horsepower motor


  • High maintenance
  • Heavy
  • Hard to start in cold weather



#08 – DEWALT DCC2560T1 FLEXVOLT MAX Air Compressor




The DEWALT DCC2560T1 FLEXVOLT MAX Air Compressor is made by a firm recognised for producing high-quality, long-lasting products. It’s a battery-powered compressor produced in the United States using a brushless motor that boosts output while consuming less power and extending battery life. The 2.5-gallon tank comes with the battery and charger, allowing you to store enough air for minor chores.

The DEWALT DCC2560T1 has a drawback in that it only produces 1.2 CFM at 90 PSI, which may not be enough to power your impact wrench for an extended period of time. It takes many minutes to fill, and it also takes a long time to recover. We would also detect a faint odour of burnt electronics every now and again.


  • 5-gallon tank
  • Made in the USA
  • Brushless motor
  • Includes battery and charger


  • 2 CFM at 90 PSI
  • It takes a long time to fill
  • Occasionally smell burning electronics



#09 – Industrial Air ILA4546065 Hi-Flo Single Stage Cast Iron Air Compressor




This is a large apparatus designed to deliver exceptional results. The Industrial Air ILA4546065 air compressor allows you to use numerous wrenches at the same time. It has a large tank capacity and will not let you down with its smooth and efficient operation. Let’s have a look at the features to learn more.

It’s ideal for 3/4-inch wrenches, which demand more torque than 12-inch wrenches. This gadget, which is powered by a 4.7 HP motor, is excellent for use with heavy-duty equipment. The task would be completed quickly.

Furthermore, the device’s 60 gallon capacity allows you to operate with it constantly for lengthy periods of time. This is big, and you won’t have to worry about the tank running out for a long time.

Even though the machine has a lot of great functions, it might get hot if you use it for a long time. If you plan on using it for several hours, it’s better to give it a break and wait for it to cool down. Continue with the task at hand once it has been completed.


  • Pneumatic tire for efficient mobility
  • Oil-lubricated pump
  • Heavy-duty motor
  • Has a quick-set regulator


  • Tends to heat up after prolonged usage



#10 – California Air Tools 10020C Ultra Quiet Oil-Free and Powerful Air Compressor




The next item on the list is a California Air Tools ultra-quiet gadget. It only generates 70 decibels of noise, which means it won’t bother you or your discussions. This is a gadget that will keep you delighted throughout the day whether you’re a noise-conscious mechanic or a DIY enthusiast.

First and foremost, we should point out that the tank is oil-free. This saves time and effort because you don’t have to bother about periodically refilling or lubricating the machine.

It delivers 5.3 CFM at 90 PSI in terms of pressure capacity. This is plenty for a wrench and will get it up and running quickly. It also comes with a 10-gallon tank, which is double the size of the Makita’s. With a bigger tank, we were able to use the impact wrench for longer periods of time.

This machine is one of the lightest on the list, at only 82.5 pounds. It has two wheels on both sides to make it easier to manoeuvre. It’s also fun to ride it up and down rocky terrain.

We believed that the 2.0 HP motor was not as strong as most of the other gadgets when it came to usage. Refilling the tank takes time and might be inconvenient if you need to get the task done fast.


  • Quick-Connect Coupler
  • Low maintenance
  • Works in all weather condition
  • Lightweight


  • Not a very powerful motor



Pneumatic nailers will speak harshly to the furthest limit of the hose and work the entire day without really any deficiency of force.

You might utilize these while showering. Snap-on your shower can, and you can have a serious shine finish right away.

Nonetheless, it is the point at which you are utilizing the wrench; you see the main additions. Simply changing all your vehicle wheels can remove it from you with that multitude of fixed nuts. 

Air blowers have numerous applications. We normally see packed air as a wellspring of energy for vehicle fixes, development obligations, and jumping games.

We will presently talk about the fundamental highlights to check prior to purchasing an air blower for an effect firearm.

  1. Think about Your Air Impact Wrench Size

You should purchase an air blower as indicated by the effect wrench size. Your effect wrench should be either ½ or ¾ inch in size. The two sizes of the wrench have various necessities.

So that from the get go, guarantee the sort of your wrench and afterward pick as per that.

  1. Pick Stationary Compressors over Ordinary Compressors

Fixed air blowers are accessible to get more than the normal air blowers involved consistently in homes and private companies. So we suggested fixed blowers over standard blowers.

  1. Versatile Air Compressors will give you a few Extra Advantages

Transportability is a significant component of electric/apparatus devices. It might create a similar air and energy, yet you can move with it starting with one spot then onto the next.

Versatile air blowers are primarily for the practical creation of wind and little assignments. Continuously ensure the subtleties of each air blower prior to getting one for yourself. Remember that compact air blowers are for little positions, so assuming your necessities are modern, you really want a more broad, business air blower.

  1. Think about Airflow Requirement Strictly

As an air blower client, it is vital for ensure you know how much air you need. The model is If a 1/2″ sway wrench requires 5.0 CFM @ 90 PSI, the blower should convey between 6.25 to 7.25 PSI.

Anything short of that won’t be effective enough since it won’t achieve any obligations required. Ensure you pick an air blower with the PSI esteem that will be productive to your necessities.

Additionally, check the air blower’s air hose fitting quality prior to purchasing to get smooth wind stream.

  1. Pick Oil-Free Models Over Lubricated Air Compressor

There are some strong air blower whiches runs without oil. Likewise, a few blowers run with oil. Considering the natural circumstances, without oil models are awesome. It’s not difficult to oversee and requires little exertion.

In any case, on the off chance that you really want a solid blower, the most ideal decision is a machine fueled with grease.

So think about your requirements and purchase the right one for your necessities.

  1. Think about Noise Levels

Individuals think about clamor as a less significant issue for rehashed confirmation. In any case, it makes issues over the long haul. We generally urge you to check over and over that the gadget isn’t making additional commotion.

  1. Electric or Gas-Powered Air Compressor?

Something final you ought to think about while purchasing an air blower is it an electrically fueled machine or an internal combustion one? Everything relies upon the power source you have, so pick in view of the sort of force you would utilize.

Air blowers are machines that produce gaseous tensions and air for different purposes. As you need to introduce one, you need to choose one that accommodates your prerequisites.

We have attempted to uncover all vital data about the air blower for sway torques. For your benefit, we have evaluated the top-selling thing. We are sure that this multitude of 7 things are the Best Air Compressor for Impact Wrench.

Presently you should simply take a look at the subtleties and consolidate your necessities with the best fitting thing.

Related Tags:

About the author

Nancy M. Lach

Leave a Comment